In the current age, not a day goes by without connecting to the internet through Wi-Fi. So, it is a serious inconvenience if you are not able to enable Wi-Fi on your system. Yes, you may use the internet through an Ethernet connection. However, it really hinders the portability of your device, especially if you use a laptop.
This issue usually happens due to problems with your Wi-Fi drivers and services. However, there may be other causes as well. In this article, you can find all possible reasons along with their corresponding solutions.
Causes for WiFi Not Turning On in Windows
Here are the potential reasons why you are not able to enable WiFi on a Windows system:
How to Fix WiFi Not Turning On inWindows?
First, restart your PC a couple of times and check if you still encounter the issue. If you do, follow the possible solutions below to resolve your issue.
Check Physical Wi-Fi Switch
Some laptops also come with physical buttons for enabling/disabling Wi-Fi. So you need to check for such a switch and ensure it is On. You can check on the official website of your laptop to know whether such a button exists as well as its location.
Most laptops also have the Wi-Fi toggle function integrated with a function. You can also press it to enable your Wi-Fi if it’s disabled.
Enable Wi-Fi from Control Panel
You won’t be able to enable Wi-Fi if it is disabled on your settings. You can check if it’s disabled as well as enable it from the Control Panel. Here’s how you can do so:
You can also enable Wi-Fi from theDevice Manager(devmgmt.mscon Run) >Network Adapters.
Enable and then Disable Airplane Mode
you’re able to also try enabling and then disabling airplane mode if you encounter this issue.
It is possible to enable Wi-Fi in airplane mode, but turning airplane mode on always disables Wi-Fi. So you’re able to toggle the mode On and Off to refresh the option for enabling Wi-Fi and resolve some temporary issues.
You can toggle the mode using the steps below:
Power Cycle PC
Another method you can try is to power cycle your PC, especially if you started encountering the issue after a power failure. Power cycling drains any residual charge from the capacitors in the device and properly refreshes the hardware devices, including Wi-Fi adapters.
Here’s what you need to do:
Run Network Adapter Troubleshooter
Windows comes with dedicated troubleshooters to troubleshoot errors in the system components. It also has a Network Adapter troubleshooter, which you can run to resolve many issues with the network devices such as Wi-Fi adapters. Here’s how you can run this troubleshooter:
Reset Wi-Fi Service
You also won’t be able to enable Wi-Fi if the Wireless service, WLAN AutoConfig, is not running on your system. Additionally, it is also possible for the service to get stuck, leading to the same issue even if it’s running. So you need tostart the serviceif it’s not running and reset the service by disabling and then re-enabling it if it is running. To do so,
Now, check if you can enable Wi-Fi this time.
Update or Rollback Wi-Fi Driver
You may also suffer from this issue due if your Wi-Fi or WLAN driver is outdated or buggy. You need toupdate it to the latest versionto prevent such issues.
On the other hand, if you started encountering this issue recently after a driver or system update, there are likely some unresolved bugs in the software. you’re able to resolve this problem by rolling back the driver.
Here are the necessary steps to determine what you need to do and how you can do it:
Reinstall Wi-Fi Driver
If you already have the latest driver, you can reinstall it to reset the software and remove any bugs within the software. Here’s how you can do so:
Change Network Setup Service Properties
Along with WLAN AutoConfig service, the issue may also occur if Network Setup Service fails to start properly. Unlike the former, this service starts only when you try installing network drivers and while configuring low-level network settings.
So, if you can’t resolve the issue even after updating or reinstalling the wireless driver, you need to make a few changes to this service and perform those tasks again. Here’s what you need to do:
Restart your PC and update/reinstall the driver. Then, check if you can enable Wi-Fi this time.
Reset Network Components
Another possible solution you can try is to reset your network components. Some misconfigured network settings may also be responsible for the issue. You can resolve such issues by resetting the network components. To do so,
Update Windows
The KB4549951 Windows update included a bug that caused many errors, including one that prevented users from enabling Wi-Fi. The KB4559004 update resolves this issue, and Microsoft has already pulled down the previous update. Nevertheless, it is also possible for some future updates to carry such bugs.
So, we always recommendupdating your systemto the latest version to avoid such issues, especially if you have a much older system. Here’s how you may do so:
