Nvidia says that its flagship RTX 5090 GPUs will not experience themelting 16-pin connectors that plagued RTX 4090graphics cards. Company representatives made this announcement during Nvidia RTX AI Day 2025 in South Korea, as reported byQuasar Zone(machine translated). Nvidia is confident that the changes it made to the connector design will avoid the issue, despite the RTX 5090 having a higher TDP of 575 watts (versus the 4090’s 450 watts).
The company, represented by Nvidia APAC Director of Tech Marketing Jeff Yen, GeForce Tech Director for Marketing Sean Cleveland, and Nvidia Korea Senior VP Sunwook Kim, was answering some questions during the Nvidia RTX AI Day 2025 event. Someone in the audience asked if the RTX 5090 solved the problem that plagued the RTX 4090. The issue being “where the connector overheated and melted”. Nvidia answered, “We don’t expect that to happen with the RTX 50 series. We made some changes to the connector to respond to the issue at the time, and we know that it is not happening now, about two years later.”
The root cause of the overheating connector is often seen as an improperly or loosely attached cable, or if the cable is bent near the plug, causing too much stress at the connection point. Because of this, the industrydeveloped the new 12V-2x6 connector, which replaced the 12VHPWR connector.
This new connector seemingly solved the overheating issue, although it’s been reported as late as April 2024 thatmany RTX 4090s continue to melt—but these were often older cards that used the older standard or those that used defective Cablemod 16-pin GPU power adapters that have since beenrecalled and discontinued.
Since Nvidia has released the RTX 5090 some two years after it started using the 12V-2x6 connector, we can safely assume that overheating power connectors will no longer be an issue. Still, some AIBs are erring on the side of caution to avoid a repeat of the melting RTX 4090 connectors.
Zotac added a Safety Light featurethat prevents the GPU from turning on until the power cable is fully and securely inserted. On the other hand, MSI introduced a simpler solution: itused a yellow-tipped 16-pin power adapteras a visual indicator. A fully seated power cable wouldn’t show any of the yellow parts—so if you still spot it after plugging it into your GPU, then the power cable is not properly attached.
Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.
Jowi Morales is a tech enthusiast with years of experience working in the industry. He’s been writing with several tech publications since 2021, where he’s been interested in tech hardware and consumer electronics.
