If you’re looking for a last-minute Halloween wearable to impress your friends, you’ve got to check out this awesomeRemy, from the movie “Ratatouille”, created by engineer, maker, and developerChristina Ernst aka shebuildsrobotsover on Instagram. Using anAdafruit Metro Mini, this little robotic rat can be worn on your head and appears to control your every movement by tugging at your hair. That said, we think it could be easily recreated using aRaspberry Pi Picowith a little tweak to the code.

TheRemy figurewas designed by Ernst and is made to be 3D printed. The hollow design makes it lightweight, and easy to mount to a hidden headband so that it can be perched right on top of your head, just like the movie. Remy’s hands have holes for your hair to pass through and are moveable thanks to a couple of hobby servos.

Raspberry Pi

Since this is meant to be worn on your head, form factor is an important consideration. Ernst opted to use two sub micro servos to control the arms as they’re much smaller and lighter than regular servos. You could upgrade them to full sized servos but some modification to the body would be necessary to make them fit.

A post shared by She Builds Robots (@shebuildsrobots)

Raspberry Pi

A photo posted by on

According to Ernst, Remy’s arms are attached to the sub micro servos by hot gluing floral wire to them through one of the servo arm holes. She also added bigger loops around his hands to fit more hair. The arms are programmed to move randomly instead of on a fixed loop. But Ernst also supplied code for using an accelerometer connected toAdafruit Metro Minias a means of input. The Adafruit Metro Mini is anArduinocompatible board with an ATmega328 CPU running at 16 MHz. You could use other boards in its place like aRaspberry Pi Picoor the newRaspberry Pi Pico 2. The accelerometer is an MPU6050 which uses I2C for communication. It only controls Remy’s right arm, but an additional sensor, or some clever math could see both of Remy’s arms being gesture controlled. However, the random movement would be an easier and convincing means to have Remy control your culinary tasks. you’re able to use anybudget 3D printerto reproduce the body but Ernst happened to use anElegoo Neptune 4 Pro—a printer we gave a glowing 4.5/5 starreviewto.

Raspberry Pi

Ernst was kind enough to make this project entirely open source for personal use so you may make it yourself at home. She’s provided all of the STL files you need to print along with all of the source code she created to bring Remy to life over atGitHub.

If you want to see thisRaspberry Pi projectin action, you can check it out over atInstagramand read more details about its construction at the GitHub link mentioned above.

Ash Hill

Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.

Ash Hill is a contributing writer for Tom’s Hardware with a wealth of experience in the hobby electronics, 3D printing and PCs. She manages the Pi projects of the month and much of our daily Raspberry Pi reporting while also finding the best coupons and deals on all tech.