One of the striking features of AirPods is its extensive battery life. Typically, an airpod lasts up-to 5 hours. But, if one of your AirPods dies faster than the other, you need to address the problem immediately.

Like any other wireless headset, each of your airpods have one set of battery in it. If that battery dies, your airpod will be rendered useless. Apple does not favor one airpod over another. They are both intended to last the same amount of time. If one of your batteries dies faster, there could be a hardware or software issue.

automatically-switch-airpods

Below is the compilation of several reasons for one AirPod dying faster issue.

Why Does One AirPod Die Faster Than the Other?

Here are some of the probable causes of why one AirPod dies faster than the other:

How to Solve One AirPod Dying Faster Issue?

Having discussed why one AirPod dies faster, it is important to know the potential fixes. You can check out the methods below and follow the step-by-step guide to resolve the issue.

Use Both AirPods Equally

If you prefer using one AirPod at a time, you may try switching ears to get a longer battery optimization out of your AirPods. We recommend that you do not rely on only one AirPod. It can deplete the battery life of one AirPod. It is better for you to use both AirPods equally to reduce the burden on only one AirPod and have lasting battery life.

Use the Microphone on AirPods Equally

When the microphone settings are set to use only one AirPod, it will likely drain the AirPod faster. So, to resolve the issue, you can select the Automatically Switch AirPods option for your AirPods. Doing so will utilize both AirPods to access the microphone; hence, both AirPods will be used equally.

Keep AirPods in the Case

When you are not using the AirPod, you should consider keeping it inside the case. If you are done using the AirPod and keep it outside the charging case, the AirPod continues to use the battery. Hence, it runs out of battery quicker than the other one.

So, you need to keep AirPod in the charging case when not in use.

AirPods-InCase

Disable the Double Tap Feature

If the AirPod battery drains faster than the other, you can also try disabling the double-tap feature. To do so, you can follow the steps below:

Unpair and Reset AirPods

Sometimes, it can be an ideal scenario to unpair and reset the AirPods to resolve some minor AirPods issues. Doing so can probably help with your one AirPod draining issue.

Clean the AirPods and Charging Case

It is necessary to keep the AirPods and the charging case clean. If the AirPods bottom or the inside of the charging case collects foreign objects or dirt particles, it can hinder the charging process.

To clean the AirPods and charging case, gently wipe them using a lint-free or a micro-fiber cloth with 70 percent isopropyl alcohol. Then, use a soft-bristled or anti-static brush to clean the tiniest spaces.

turn-off-double-tap-for-left-airpod

Replace AirPod’s Battery

If your AirPods still fall under the warranty period, you can get them replaced without any additional cost in the Apple Store. You can visit theApple Support pagefor more information on Battery Service.

How to Extend AirPods Battery Life?

Apart from the methods above, here are some additional techniques to help extend the battery life of AirPods.

Listen at Lower Volume

Using AirPods at a louder volume means more power consumption leading to maximum battery usage. So, the potential solution for this issue would be to listen at a lower volume. Doing so can give you an extended battery life of AirPods.

Fully Drain the AirPod and Charge Again

We also recommend that you drain all the batteries of the AirPods to reset the battery cycle. It can help enhance the battery life of AirPods.

So, use the AirPods to the fullest and bring both the AirPods down to zero. After this, put the AirPods in the charging case and let them get fully charged.

iphone-bluetooth-forget-device-button-1

Turn Off Noise Cancellation and Automatic Ear Detection

To get better battery life out of your AirPods, you can turn off the Smart features for your AirPods. It includes Noise Cancellation and Automatic Ear Detection.

You can follow the steps below to know the process.

Update AirPods Firmware

Sometimes when the AirPods keep running on an older firmware, it can drain the battery level quicker than usual. So, you must consider maintaining the AirPods firmware updated to reduce the risk of a shorter battery span. Also, updating the firmware can clear bugs and other technical problems.

cleaning-outer-part-of-airpods

AirPods-Charging

automatic-ear-detection-2